Accounting – Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) User Manual
Page 846
Brocade Mobility RFS Controller CLI Reference Guide
833
53-1003098-01
8
accounting
Configures the server type and interval at which interim accounting updates are sent to the server.
A maximum of 6 accounting servers can be configured.
Supported in the following platforms:
•
Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
•
Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
•
Service Platforms — Brocade Mobility RFS9510
Syntax:
accounting [interim|server|type]
accounting interim interval <60-3600>
accounting server [<1-6>|preference]
accounting server preference [auth-server-host|auth-server-number|none]
accounting server <1-6> [dscp|host|nai-routing|onboard|proxy-mode|
retry-timeout-factor|timeout]
accounting server <1-6> [dscp <0-63>|retry-timeout-factor <50-200>]
accounting server <1-6> host
{port <1-65535>}
accounting server <1-6> nai-routing realm-type [prefix|suffix] realm
{strip}
accounting server <1-6> onboard [self|controller]
accounting server <1-6> proxy-mode [none|through-controller|through-mint-host
accounting server <1-6> timeout <1-60> {attempts <1-10>}
accounting type [start-interim-stop|start-stop|stop-only]
Parameters
accounting interim interval <60-3600>
Displays running system information
Writes information to memory or terminal
TABLE 6
AAA-Policy-Config Commands
Command
Description
Reference
interim
Configures the interim accounting interval
interval <60-3000>
Specify the interim interval from 60 - 3600 seconds. The default is 1800 seconds.