Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 1129)

Brocade Mobility RFS Controller CLI Reference Guide 1121
53-1003098-01
19
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
Syntax:
title [any|contains|exact|not-contains]
title [any|contains |exact |not-contains ]
Parameters
title [any|contains |exact |not-contains ]
Example
rfs7000-37FABE(config-role-policy-test-user-role-testing)#title any
Related Commands:
use
user-role commands
Configures an access list based firewall with this user role
A firewall is a mechanism enforcing access control, and is considered a first line of defense in
protecting proprietary information within the network. The means by which this is accomplished
varies, but in principle, firewalls are mechanisms both blocking and permitting data traffic based
on inbound and outbound IP and MAC rules.
IP based firewall rules are specific to source and destination IP addresses and the unique rules
and precedence orders assigned. Both IP and non-IP traffic on the same layer 2 interface can be
filtered by applying both an IP ACL and a MAC.
title Specifies a wireless client filter based on how the title string, returned by the RADIUS server, matches the
provided expression. Select one of the following options: any, contains, exact, or not-contains.
any This user role can fit any wireless client irrespective of the title (no strings to match).
contains The user role is applied only when the title string, returned by the RADIUS server, contains the string
specified in the role.
•
– Specify the string to match (this is case sensitive, and is compared against the title
returned by the RADIUS server). It should contain the provided expression.
exact The role is applied only when the title string, returned by the RADIUS server, exactly matches the string
specified in the role.
•
– Specify the exact string to match (this is case sensitive, and is compared against the title
returned by the RADIUS server). It should be an exact match.
not-contains The role is applied only when the title string, returned by the RADIUS server, does not contain the string
specified in the role.
•
– Specify the string not to match (this is case sensitive, and is compared against the title
returned by the RADIUS server). It should not contain the provided expression.
no Removes the ‘title’ filter string configured with a user role