Br-location – Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) User Manual
Page 1106
1098
Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
19
br-location
Configures an AP’s deployment location based filter for this user-defined role
Supported in the following platforms:
•
Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
•
Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
•
Service Platforms — Brocade Mobility RFS9510
Syntax:
br-location [any|contains|exact|not-contains]
br-location any
br-location [contains|exact|not-contains]
Parameters
br-location any
br-location [contains|exact|not-contains]
Example
rfs7000-37FABE(config-role-policy-test-user-role-testing)#br-location
contains office
rfs7000-37FABE(config-role-policy-test-user-role-testing)#show context
user-role testing precedence 10
br-location contains office
rfs7000-37FABE(config-role-policy-test-user-role-testing)#
Invokes service commands to troubleshoot or debug
(config-if)
instance
configurations
Displays running system information
Writes information to memory or terminal
Commands
Description
Reference
br-location any
Specifies the AP location to match (in a RF Domain) or the AP’s resident configuration
•
any – Defines an AP’s location as any
br-location
Specifies the AP location to match (in a RF Domain) or the AP’s resident configuration. Select one of the
following filter options: contains, exact, or not-contains.
contains
Applies role if the associating AP’s location contains the location string specified in the role.
•
exact
Applies role if the associating AP’s location exactly matches the string specified in the role.
•
not-contains
Applies role if the associating AP’s location does not contain the location string specified in the role.
•