Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 65)

Brocade Mobility RFS Controller CLI Reference Guide 47
53-1003098-01
2
device-upgrade rf-domain [|all] [all|br650|br6511|
br1220|br71xx|br81xx|rfs4000|rfs6000|rfs7000] {from-controller
{no-reboot|reboot-time |upgrade-time {no-reboot|
reboot-time }} {(staggered-reboot)}
rf-domain
[|
all] Upgrades firmware on devices in a specified RF Domain or all RF Domains
•
– Upgrades devices in a specified RF Domain. Specify the RF Domain name.
•
all – Upgrades devices across all RF Domains
[all|br650|br6511|br122
0|br71xx|br81xx|rfs4000
|rfs6000|rfs7000] After specifying the RF Domain, select the device type.
•
all – Upgrades firmware on all devices
Loads device firmware image from a specified location. Select the device type and provide the location of
the required device firmware image.
•
Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point, Brocade
Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade Mobility 1240 Access Point
•
Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade Mobility
RFS7000
•
Service Platforms — Brocade Mobility RFS9510
•
Brocade Mobility 650 Access Point – Upgrades firmware on all Brocade Mobility 650 Access Points
•
Brocade Mobility 6511 Access Point – Upgrades firmware on all Brocade Mobility 6511 Access Points
•
Brocade Mobility 1220 Access Point – Upgrades firmware on all Brocade Mobility 1220 Access Points
•
Brocade Mobility 71XX Access Point – Upgrades firmware on all Brocade Mobility 71XX Access Points
•
Brocade Mobility 1240 Access Point – Upgrades firmware on all Brocade Mobility 1240 Access Points
•
Brocade Mobility RFS4000 – Upgrades firmware on all Brocade Mobility RFS4000s
•
Brocade Mobility RFS6000 – Upgrades firmware on all Brocade Mobility RFS6000s
•
Brocade Mobility RFS7000 – Upgrades firmware on all Brocade Mobility RFS7000s
from-controller Optional. Upgrades a device through the adopted device
no-reboot
{staggered-reboot} Optional. Disables automatic reboot after a successful upgrade (the device must be manually restarted)
reboot-time
{staggered-reboot} Optional. Schedules an automatic reboot after a successful upgrade. Specify the reboot time in the
MM/DD/YYYY-HH:MM or HH:MM format.
upgrade-time
{no-reboot|
reboot-time } Optional. Schedules an automatic firmware upgrade
•
– Specify the upgrade time in the MM/DD/YYYY-HH:MM or HH:MM format. After a scheduled
upgrade, the following actions can be performed:
•
no-reboot – Optional. Disables automatic reboot after a successful upgrade
(the device must be manually restarted)
•
reboot-time – Optional. Schedules an automatic reboot after a successful
upgrade. Specify the reboot time in the MM/DD/YYYY-HH:MM or HH:MM format.
staggered-reboot This keyword is common to all of the above.
•
Optional. Enables staggered reboot (one at a time), without network impact