Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 825)

812 Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
7
Parameters
country-code
Example
rfs7000-37FABE(config-device-00-04-96-4A-A7-08)#country-code us
rfs7000-37FABE(config-device-00-04-96-4A-A7-08)#show context
br71xx 00-04-96-4A-A7-08
use profile default-br71xx
use rf-domain default
hostname br7131-4AA708
area RMZEcospace
contact motorolasolutions
country-code us
channel-list 2.4GHz 1,2
rfs7000-37FABE(config-device-00-04-96-4A-A7-08)#
Related Commands:
floor
Device Config Commands
Sets the building floor where the device is deployed
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
Syntax:
floor
Parameters
floor
Example
rfs7000-37FABE(config-device-00-04-96-4A-A7-08)#floor 5thfloor
rfs7000-37FABE(config-device-00-04-96-4A-A7-08)#show context
br71xx 00-04-96-4A-A7-08
use profile default-br71xx
use rf-domain default
country-code
Defines the two digit country code for legal device deployment
•
– Specify the two letter ISO-3166 country code.
no Removes the configured country code
Sets the building floor where the device is deployed