Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 837)

824 Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
7
Syntax:
override-wlan [ssid|vlan-pool|wpa-wpa2-psk]
override-wlan [ssid |vlan-pool <1-4094> {limit <0-8192>}|
wpa-wpa2-psk ]
Parameters
override-wlan WLAN [ssid |vlan-pool <1-4094> {limit <0-8192>}|
wpa-wpa2-psk ]
Example
rfs7000-37FABE(config-device-00-04-96-4A-A7-08)#override-wlan test vlan-pool
8
rfs7000-37FABE(config-device-00-04-96-4A-A7-08)#show context
br71xx 00-04-96-4A-A7-08
use profile default-br71xx
use rf-domain default
hostname TechPubAP7131
floor 5thfloor
layout-coordinates 1.0 2.0
license AP aplicenseley@1234 aplicensekey@123
location Block3B
no contact
country-code us
channel-list 2.4GHz 1,2
override-wlan test vlan-pool 8
mac-name 00-04-96-4A-A7-08 5.4TestAP
neighbor-info-interval 50
rfs7000-37FABE(config-device-00-04-96-4A-A7-08)#
Related Commands:
remove-override
Device Config Commands
Removes device overrides
Supported in the following platforms:
Specify the WLAN name.
Configure the following WLAN parameters: SSID, VLAN pool, and WPA-WPA2 key.
SSID Configures the WLAN Service Set Identifier (SSID)
•
– Specify an SSID ID.
vlan-pool <1-4094> {limit
<0-8192>} Configures a pool of VLANs for the selected WLAN
•
<1-4094> – Specifies a VLAN pool ID from 1 - 4094.
•
limit – Optional. Limits the number of users on this VLAN pool
•
<0-8192> – Specify the user limit from 0 - 8192.
NOTE: The VLAN pool configuration overrides the VLAN configuration.
wpa-wpa2-psk Configures the WLAN WPA-WPA2 key or passphrase for the selected WLAN
•
– Specify a WPA-WPA2 key or passphrase.
no Removes RF Domain level WLAN overrides