Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 935)

Brocade Mobility RFS Controller CLI Reference Guide 923
53-1003098-01
12
deny host B4-C7-99-6D-CD-9B any rule-precedence 2
rfs4000-229D58(config-mac-acl-test1)#
In the following example a new rule is inserted between the rules having
precedences 1 and 2. The precedence of the existing precedence ‘2’ rule
changes to precedence 3.
rfs4000-229D58(config-mac-acl-test1)#insert permit host B4-C7-99-6D-B5-D6 host
B4-C7-99-6D-CD-9B rule-precedence 2
rfs4000-229D58(config-mac-acl-test1)#show context
mac access-list test1
deny 11-22-33-44-55-66 11-22-33-44-55-77 any rule-precedence 1
permit host B4-C7-99-6D-B5-D6 host B4-C7-99-6D-CD-9B rule-precedence 2
deny host B4-C7-99-6D-CD-9B any rule-precedence 3
rfs4000-229D58(config-mac-acl-test1)#
no
mac-access-list
Negates a command or sets its default
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
Syntax:
no [deny|disable|permit]
no [deny|permit] [ |any|host ]
[ |any|host ]
(dot1p <0-7>,type
[8021q|<1-65535>|aarp|appletalk|arp|ip|ipv6|ipx|mint|rarp|
wisp],vlan <1-4095>) log (rule-precedence <1-5000>)
{(rule-description )}
no disable [deny|permit]
Parameters
no [deny|permit] [ |any|host ]
[ |any|host ] (dot1p <0-7>,
type [8021q|<1-65535>|aarp|appletalk|arp|ip|ipv6|ipx|mint|rarp|wisp],vlan
<1-4095>) log (rule-precedence <1-5000>) {(rule-description )}
no [deny|permit] Removes a deny or permit rule from the MAC ACL
Specify the source MAC address and mask
any Select ‘any’ if the rule is applicable to any source MAC address