Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 1057)

1048 Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
17
rfs7000-37FABE(config-radius-group-test)#no policy day all
The following example shows the RADIUS guest group ‘test’ settings after the
‘no’ commands are executed:
rfs7000-37FABE(config-radius-group-test)#show context
radius-group test
policy vlan 1
policy ssid motorolasol
policy time start 13:30 end 17:30
rfs7000-37FABE(config-radius-group-test)#
Related Commands:
radius-server-policy
RADIUS-POLICY
Creates an onboard device RADIUS server policy.
A RADIUS server policy is a unique authentication and authorization configuration that receives
user connection requests, authenticates users, and returns configuration information necessary
for the RADIUS client to deliver service to the user. The client is the entity with authentication
information requiring validation. The local RADIUS server has access to a database of
authentication information used to validate the client's authentication request.
The local RADIUS server uses authentication schemes like PAP, CHAP, or EAP to verify and confirm
information provided by a user. The user's proof of identification is verified, along with, optionally,
other information. A local RADIUS server policy can also be configured to refer to an external
Lightweight Directory Access Protocol (LDAP) resource to verify a user's credentials.
Use the (config) instance to configure RADIUS-Server-Policy related parameters. To navigate to the
RADIUS-Server-Policy instance, use the following commands:
(config)#radius-server-policy
rfs7000-37FABE(config)#radius-server-policy test
rfs7000-37FABE(config-radius-server-policy-test)#?
Radius Configuration commands:
authentication Radius authentication
chase-referral Enable chasing referrals from LDAP server
crl-check Enable Certificate Revocation List( CRL ) check
ldap-agent LDAP Agent configuration parameters
ldap-group-verification Enable LDAP Group Verification setting
ldap-server LDAP server parameters
local RADIUS local realm
nas RADIUS client
no Negate a command or set its defaults
proxy RADIUS proxy server
session-resumption Enable session resumption/fast reauthentication by
using cached attributes
use Set setting to use
guest Manages a guest user linked with a captive portal
policy Sets a RADIUS group’s authorization policies
rate-limit Sets a RADIUS group’s rate limit