Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 675)

662 Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
7
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
Syntax:
dot1x supplicant username password [0 |2 |]
Parameters
dot1x supplicant username password [0 |2 |]
Example
rfs4000-229D58(config-profile-testBrocade Mobility RFS4000-if-ge1)#dot1x
supplicant username bob
password 0 motorolasolutions@123
rfs4000-229D58(config-profile-testBrocade Mobility RFS4000-if-ge1)#show
context
interface ge1
dot1x supplicant username bob password 0 motorolasolutions@123
dot1x authenticator host-mode multi-host
dot1x authenticator guest-vlan 2
dot1x authenticator reauthenticate
dot1x authenticator max-reauth-count 6
ip dhcp trust
qos trust dscp
qos trust 802.1p
rfs4000-229D58(config-profile-testBrocade Mobility RFS4000-if-ge1)#
Related Commands:
duplex
interface-config-instance
Configures duplex mode (for the flow of packets) for an interface
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
dot1x supplicant Configures 802.1x suppliant settings
username Sets the username for authentication
•
– Specify the supplicant’s username.
password
[0 |
2 |] Sets the password associated with the supplicant’s username. Select any one of the following options:
•
0 – Sets a clear text password
•
2 – Sets an encrypted password
•
– Specify the password.
no Removes 802.1X supplicant (client) settings