Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 156)

Brocade Mobility RFS Controller CLI Reference Guide 139
53-1003098-01
3
ssh
Usage Guidelines:
To exit the other device’s context, use the command that is relevant to that device.
Example
rfs7000-37FABE#ssh 172.16.10.8 admin
[email protected]'s password:
rfs4000-229D58>
telnet
Privileged Exec Mode Commands
Opens a Telnet session between two network devices
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
Syntax:
telnet {}
Parameters
telnet {}
Usage Guidelines:
To exit the other device’s context, use the command relevant to that device.
Example
rfs4000-229D58#telnet 192.168.13.25
Entering character mode
Escape character is '^]'.
Brocade Mobility 71XX Access Point release 5.5.0.0-003D
br71xx-0F43D8 login: admin
Password:
br71xx-0F43D8>
Specify the remote systems’s IP address or hostname.
Specify the name of the user requesting the SSH connection.
Configures the remote system’s IP address or hostname. The Telnet session will be established between
the connecting system and the remote system.
•
– Specify the remote system’s IP address or hostname.
Optional. Specify the Transmission Control Protocol (TCP) port.