Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 393)

Brocade Mobility RFS Controller CLI Reference Guide 377
53-1003098-01
4
Supported in the following platforms:
• Service Platforms — Brocade Mobility RFS9510
Syntax:
forward-proxy {ip|protocol|vlan}
forward-proxy {ip port <1-32768>}
forward-proxy {protocol [all|ftp|gopher|https]}
forward-proxy {vlan }
Parameters
forward-proxy (ip port <1-32768>}
forward-proxy {protocol [all|ftp|gopher|https]}
forward-proxy {vlan }
Example
nx4500-5CFA2B(config-smart-cache-policy-test)#forward-proxy vlan 10-20
nx4500-5CFA2B(config-smart-cache-policy-test)#
nx4500-5CFA2B(config-smart-cache-policy-test)#show context
smart-cache-policy test
forward-proxy vlan 10-20
cache size 30
aging precedence 1 ignore-case \\.jgp$ min-age 100 freshness-factor 75
max-age 200 reload-into-ims
access-log rotate 10 rotate-type duration 10 day
nx4500-5CFA2B(config-smart-cache-policy-test)#
Related Commands:
http-access
smart-cache-policy-mode commands
ip
port <1-32768> Optional. Configures the IP address and TCP port for forward proxying
This is the IP address where the forward smart caching proxy server is listening.
The default port is 1.
protocol
[all|ftp|gropher|https] Optional. Selects the additional forward proxy resource protocol for smart caching. the options are:
•
ftp – Selects FTP as the forward proxy resource protocol
•
gopher – Selects Gopher as the forward proxy resource protocol
•
https – Selects HTTPS as the forward proxy resource protocol
•
all – Selects all protocols
vlan Optional. Configures the VLAN(s) for which forward proxy mode (content caching) is enabled. By default
content caching is disabled on all VLANs.
•
– Specify the list of VLANs.
no Reverts address and port for forward caching proxy service