Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 210)

194 Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
4
simultaneous-users
captive-portal-mode commands
Specifies the number of MAC addresses that can simultaneously use a particular username. This
option is disabled by default.
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
Syntax:
simultaneous-users <1-8192>
Parameters
simultaneous-users <1-8192>
Example
rfs7000-37FABE(config-captive-portal-test)#simultaneous-users 5
rfs7000-37FABE(config-captive-portal-test)#show context
captive-portal test
access-time 35
custom-auth info bob,\ [email protected]
connection-mode https
inactivity-timeout 750
server host 172.16.10.9
simultaneous-users 5
rfs7000-37FABE(config-captive-portal-test)#
Related Commands:
terms-agreement
captive-portal-mode commands
Enforces the user to agree to terms and conditions (included in the login page) for captive portal
access. This feature is disabled by default.
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
<1-8192> Specifies the number of MAC addresses that can simultaneously use a particular username. Select a number
from 1 - 8192.
no Resets or disables captive portal commands