Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 146)

Brocade Mobility RFS Controller CLI Reference Guide 129
53-1003098-01
3
no captive-portal client [captive-portal |]
{on }
no crypto pki [server|trustpoint] {del-key {on
}|
on }
no logging monitor
no page
no service block-adopter-config-update
no service locator {on }
no service [ssm|wireless] trace pattern {|on }
no captive-portal client Disconnects captive portal clients from the network
captive-portal
Disconnects captive portal clients
•
– Specify the captive portal name.
Disconnects a specified client
•
– Specify the client’s MAC address.
on
> Optional. Disconnects a specified captive portal client or all clients on a specified device or RF Domain
•
– Specify the name of the AP, wireless controller, service platform, or
RF Domain.
no crypto pki Deletes all PKI authentications
[server|trustpoint]
Deletes PKI authentications, such as server certificates and trustpoints
•
server – Deletes server certificates
•
trustpoint – Deletes a trustpoint and its associated certificates
The following keyword is common to the server and trustpoint parameters:
•
– Deletes a trustpoint or its server certificate. Specify the
trustpoint name.
del-key
{on } Optional. Deletes the private key associated with a server certificate or trustpoint. The operation fails if the
private key is in use by other trustpoints.
•
on – Deletes the private key on a specified device
•
– Specify the name of the AP, wireless controller, or service platform.
no logging monitor Resets terminal lines message logging levels
no page Resets controller paging function to its default. Disabling the “page” command displays the CLI command
output at once, instead of page by page.
no service Disables certain specified services or features
block-adopter-config-update Enables configuration updates from the NOC controller. If the configuration update from the NOC controller
feature is blocked, use the no > service > block-adopter-config-update command to enable it.
no service Disables LEDs on a specified device in the WLAN. It also resets the CLI table expand and MiNT protocol
configurations.
locator
{on } Disables LEDs on a specified device
•
– Optional. Specify the name of the AP, wireless controller, or service platform.
no service Disables certain specified services or features
[ssm|traceroute] Disables the following features:
•
ssm – Disables Security Services Module (SSM) related services
•
traceroute – Disables wireless related services