Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 638)

Brocade Mobility RFS Controller CLI Reference Guide 625
53-1003098-01
7
Syntax:
session-key [inbound|outbound] [ah|esp] <256-4294967295>
session-key [inbound|outbound] ah <256-4294967295> [0|2|authenticator
[md5|sha]]
session-key [inbound|outbound] esp <256-4294967295> [0|2|cipher
[3des|aes|aes-192|
aes-256|des|esp-null]] authenticator [md5|sha]
Parameters
session-key [inbound|outbound] ah <256-4294967295> [0|2|authenticator
[md5|sha]]
session-key [inbound|outbound] esp <256-4294967295> [0|2|cipher
[3des|aes|aes-192|aes-256|des|esp-null]] authenticator [md5|sha]
session-key
[inbound|outbound] Defines the manual inbound and outbound security association key parameters
ah <256-4294967295> Configures authentication header (AH) as the security protocol for the security session
•
<256-4294967295> – Sets the SPI for the security association from 256 - 4294967295
The SPI (in combination with the destination IP address and security protocol) identifies the security
association.
[0|2|authenticator
[md5|sha] ] Specifies the key type
•
0 – Sets a clear text key
•
2 – Sets an encrypted key
•
authenticator – Sets AH authenticator details
•
md5 – AH with MD5 authentication
•
sha – AH with SHA authentication
•
– Sets security association key value. The following key lengths (in hex
characters) are required (w/o leading 0x).AH-MD5: 32, AH-SHA: 40
session-key
[inbound|outbound] Defines the manual inbound and outbound security association key parameters
esp
<256-4294967295> Configures Encapsulating Security Payloads (ESP) as the security protocol for the security session. This is
the default setting.
•
<256-4294967295> – Sets the SPI for the security association from 256 - 4294967295
The SPI (in combination with the destination IP address and security protocol) identifies the security
association.
[0|2|cipher
[3des|aes|aes-192|
aes-256|des|esp-null]]
•
0 – Sets a clear text key
•
2 – Sets an encrypted key
•
cipher – Sets encryption/decryption key details
•
3des – ESP with 3DES encryption
•
aes – ESP with AES encryption
•
aes-192 – ESP with AES-192 encryption
•
aes-256 – ESP with AES-256 encryption
•
des – ESP with DES encryption
•
esp-null – ESP with no encryption
•
authenticator – Specify ESP authenticator details
•
md5 – ESP with MD5 authentication
•
sha – ESP with SHA authentication
•
– Sets security association key value. The following key lengths (in hex
characters) are required (w/o leading 0x).AH-MD5: 32, AH-SHA: 40