Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) User Manual
Page 1188
1180
Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
22
no wmm [backgorund|best-effort|video|voice] [aifsn|cw-max|cw-min|txop-limit]
Example
The following example shows the WLAN QoS Policy ‘test’ settings before the
‘no’ commands are executed:
rfs7000-37FABE(config-wlan-qos-test)#show context
wlan-qos-policy test
classification non-wmm video
multicast-mask primary 11-22-33-44-55-66/22-33-44-55-66-77
classification non-unicast normal
qos trust dscp
qos trust wmm
accelerated-multicast autodetect classification voice
rfs7000-37FABE(config-wlan-qos-test)#
rfs7000-37FABE(config-wlan-qos-test)#no classification non-wmm
rfs7000-37FABE(config-wlan-qos-test)#no multicast-mask primary
rfs7000-37FABE(config-wlan-qos-test)#no qos trust dscp
The following example shows the WLAN QoS Policy ‘test’ settings after the ‘no’
commands are executed:
rfs7000-37FABE(config-wlan-qos-test)#show context
wlan-qos-policy test
classification non-unicast normal
no qos trust dscp
qos trust wmm
accelerated-multicast autodetect classification voice
rfs7000-37FABE(config-wlan-qos-test)#
Related Commands:
qos
no wmm
Disables 802.11e/wireless multimedia parameters
background
Disables background access category parameters
best-effort
Disables best effort access category parameters
video
Disables video access category parameters
voice
Disables voice access category parameters
Configures the accelerated multicast streams address and forwards the QoS classification
Classifies WLAN traffic based on priority
Configures the egress prioritization multicast mask
Defines the QoS configuration
Configures a WLAN’s traffic rate limits
Enables Spectralink voice protocol support on a WLAN
Prioritizes voice client over other clients
Configures the 802.11e/wireless multimedia parameters