Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 110)

Brocade Mobility RFS Controller CLI Reference Guide 93
53-1003098-01
3
1 1 up1 B4-C7-99-58-72-58 forward
1 1 up1 B4-C7-99-71-17-28 forward
--------------------------------------------------------
Total number of MACs displayed: 9
nx4500-5CFA2B#
clock
Privileged Exec Mode Commands
Sets a device’s system clock
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
Syntax:
clock set <1-31> <1993-2035> {on }
Parameters
clock set <1-31> <1993-2035> {on }
Example
rfs4000-229D58#clock set 14:45:30 15 Feb 2013
rfs4000-229D58#
rfs4000-229D58#show clock
2013-02-15 14:45:43 UTC
rfs4000-229D58#
cluster
Privileged Exec Mode Commands
Initiates the cluster context. The cluster context provides centralized management to configure all
cluster members from any one member.
Commands executed under this context are executed on all members of the cluster.
clock set Sets a device’s system clock
Sets the current time (in military format hours, minutes and seconds)
<1-31> Sets the numerical day of the month
Sets the month of the year from Jan - Dec
<1993-2035> Sets a valid four digit year from 1993 - 2035
on Optional. Sets the clock on a specified device
•
– Specify the name of the AP, wireless controller, or service platform.