Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 1070)

Brocade Mobility RFS Controller CLI Reference Guide 1061
53-1003098-01
17
no ldap-agent [join-retry-timeout|primary|secondary]
no local realm [|all]
no proxy [realm |retry-count|retry-delay]
no ldap-server [dead-period|primary|secondary]
no use [radius-group [|all]|radius-user-pool-policy
[|all]]
Example
The following example shows the RADIUS server policy ‘test’ settings before
the ‘no’ commands are executed:
rfs7000-37FABE(config-radius-server-policy-test)#show context
radius-server-policy test
authentication eap-auth-type tls
no nas Removes a RADIUS server’s client
•
– Sets the IP address of the RADIUS client in the A.B.C.D/M format
no session-resumption Disables a RADIUS server’s session resumption settings
no ldap-agent Removes the LDAP agent parameters on this RADIUS server policy
join-retry-timeout Removes the configured retry interval (this is the interval, in seconds, after which a access point or wireless
controller retries joining the LDAP server’s domain)
primary Removes the primary LDAP server details (such as, domain name, admin user name, and password)
secondary Removes the secondary LDAP server details (such as, domain name, admin user name, and password)
no local Removes a RADIUS server’s local realm
realm
[|all] Removes a specified realm (specified by the parameter) or all configured realms
no proxy Removes a RADIUS proxy server’s settings
realm
Removes a proxy server’s realm name (specified by the parameter)
retry-count Removes a proxy server’s retry count
retry-delay Removes a proxy server’s retry delay count
no ldap-server Disables the LDAP server parameters
dead-period Sets the dead period as the duration the RADIUS server will not contact the LDAP server after finding it
unavailable.
primary Removes the primary LDAP server
secondary Removes the secondary LDAP server
no use Removes the RADIUS group or a RADIUS user pool policy
radius-group
Removes a specified RADIUS group or all RADIUS groups
•
– Specify the RADIUS group name.
•
all – Removes all RADIUS groups
radius-user-pool-policy
[|
all] Removes a specified RADIUS user pool or all RADIUS user pools
•
– Specify the RADIUS user pool name.
•
all – Removes all RADIUS user pools