Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 1316)

1308 Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
28
rfs4000-229D58(config-passpoint-policy-test)#3gpp mcc 310 mnc 970
rfs4000-229D58(config-passpoint-policy-test)#
rfs4000-229D58(config-passpoint-policy-test)#show context
hotspot2-policy test
3gpp mcc 310 mnc 970
3gpp mcc 505 mnc 14
rfs4000-229D58(config-passpoint-policy-test)#
Related Commands:
access-network-type
passpoint-policy
Configures the access network type for this hotspot. The beacons and probe responses
communicate the type of hotspot (public, private, guest-use, emergency etc.) to clients seeking
access.
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
Syntax:
access-network-type
[chargeable-public|emergency-services|experimental|free-public|
personal-device|private|private-guest|wildcard]
Parameters
access-network-type
[chargeable-public|emergency-services|experimental|free-public|
personal-device|private|private-guest|wildcard]
Example
rfs4000-229D58(config-passpoint-policy-test)#access-network-type
chargeable-public
no Removes the specified 3gpp PLMN information and its corresponding MCC/MNC settings
access-network-type Select the access network type for this hotspot. The options are:
•
chargeable-public – The network type is a chargeable public network
•
emergency-services – The network is used to provide emergency services only
•
experimental – The network is used for test or experimental purposes only
•
free-public – The network type is a free public
•
personal-device – The network is used for personal devices only
•
private – The network is a private network
•
private-guest – The network is a private network with guest access (default setting)
•
wildcard – Includes all access network types
If the network type is set to chargeable-public, probe responses advertise this hotspot as a
chargeable-public hotspot.