beautypg.com

Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) User Manual

Page 877

background image

Brocade Mobility RFS Controller CLI Reference Guide

865

53-1003098-01

9

redirect

[ap621|ap622|br650|br6511|ap6521|br1220|ap6532|ap6562|br71xx|br81xx|ap82xx|

rfs4000|rfs6000|rfs7000|nx45xx|nx65xx|nx9000] precedence <1-10000>

controller [|] any

redirect

[ap621|ap622|br650|br6511|ap6521|br1220|ap6532|ap6562|br71xx|br81xx|ap82xx|

rfs4000|rfs6000|rfs7000|nx45xx|nx65xx|nx9000] precedence <1-10000>

controller [|] [cdp-match

|

dhcp-option |fqdn |ip [

|]|

lldp-match |mac {}|model-number

|

serial-number |vlan ]

Parameters

redirect [ap621|ap622|br650|br6511|ap6521|br1220|ap6532|ap6562|br71xx|br81xx|

ap82xx|rfs4000|rfs6000|rfs7000|nx45xx|nx65xx|nx9000] precedence <1-10000>

controller [|] any

deny

[ap621|ap622|br650|br6511|ap6521|br1220|ap6532|ap6562|br71xx|br81xx|ap82xx|

rfs4000|rfs6000|rfs7000|nx45xx|nx65xx|nx9000] precedence <1-1000> controller

[|] [cdp-match

|dhcp-option |fqdn |ip [

redirect

Adds a redirect adoption rule. The rule applies to the device type selected. Specify the device type and
assign a precedence to the rule.
The different device types are:

Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point, Brocade
Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade Mobility 1240 Access Point

Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade Mobility
RFS7000

Service Platforms — Brocade Mobility RFS9510

An adoptee controller, such as Brocade Mobility RFS4000, Brocade Mobility RFS6000, and Brocade
Mobility RFS7000, can be redirected to another controller (configured to adopt controllers) with a capacity
equal to or higher than its own. For more information, see

controller

.

precedence
<1-10000>

Sets the rule precedence. Rules with lower values get precedence over rules with higher values.

controller
[|

]

Configures the controller to which the adopting devices are redirected. Specify the controller’s IP address
or hostname.

– Specifies the controller’s IP address

– Specifies the controller’s hostname

any

Indicates any device. Any device seeking adoption is redirected.