Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 710)

Brocade Mobility RFS Controller CLI Reference Guide 697
53-1003098-01
7
NOTE
The MCS-1s and MCS-2s options are available for each supported access point.
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
Syntax:
data-rates [b-only|g-only|a-only|bg|bgn|gn|an|default|custom|mcs]
data-rates [b-only|g-only|a-only|bg|bgn|gn|an|default]
data-rates custom
[1|2|5.5|6|9|11|12|18|24|36|48|54|mcs-1s|mcs-2s|mcs-3s|basic-1|
basic-2|basic-5.5|basic-6|basic-9|basic-11|basic-12|basic-18|basic-24|basic-3
6|
basic-48|basic-54|basic-mcs-1s]
data-rates mcs qam-only
Parameters
data-rates [b-only|g-only|a-only|bg|bgn|gn|an|default]
b-only Supports operation in the 802.11b mode only (applicable for 2.4 and 4.9 GHz bands)
g-only Uses rates that support operation in the 802.11g mode only (applicable for 2.4 and 4.9 GHz bands)
a-only Uses rates that support operation in the 802.11a mode only (applicable for 5.0 GHz band only)
bg Uses rates that support 802.11b and 802.11g wireless clients (applicable for 2.4 and 4.9 GHz bands)
bgn Uses rates that support 802.11b, 802.11g, and 802.11n wireless clients (applicable for 2.4 and 4.9 GHz
bands)
gn Uses rates that support 802.11g and 802.11n wireless clients (applicable for 2.4 and 4.9 GHz bands)
an Uses rates that support 802.11a and 802.11n wireless clients (applicable for 5.0 GHz band only)
default Enables the default data rates according to the radio’s band of operation