Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 881)

Brocade Mobility RFS Controller CLI Reference Guide 869
53-1003098-01
9
upgrade
[ap621|ap622|br650|br6511|ap6521|br1220|ap6532|ap6562|br71xx|br81xx|ap82xx|
rfs4000|rfs6000|rfs7000|nx45xx|nx65xx|nx9000] precedence <1-10000> [cdp-match
|dhcp-option |fqdn |ip [
|]|
lldp-match |mac {}|model-number
|
serial-number |vlan ]|lldp-match |mac
{}|model-number |serial-number
|vlan ]
precedence
<1-10000> Sets the rule precedence. Rules with lower values get precedence over rules with higher values.
any Supported in the following platforms: Indicates any device. Any device, of the selected type, is
upgraded. For example, if the device type selected is
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511
Access Point, Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access
Point, Brocade Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000,
Brocade Mobility RFS7000
• Service Platforms — , Brocade Mobility RFS9510
Supported in the following platforms: , any
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511
Access Point, Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access
Point, Brocade Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000,
Brocade Mobility RFS7000
• Service Platforms — , Brocade Mobility RFS9510
device is upgraded.
redirect Adds a device upgrade rule. The rule applies to the device type selected. Specify the device type and
assign a precedence to the rule.
The different device types are:
•
Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point, Brocade
Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade Mobility 1240 Access Point
•
Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade Mobility
RFS7000
•
Service Platforms — Brocade Mobility RFS9510
precedence
<1-10000> Sets the rule precedence. Rules with lower values get precedence over rules with higher values.
cdp-match
Configures the device location to match, based on CDP snoop strings
•
– Specify the location. Devices matching the specified string are upgraded.
dhcp-option
Configures the DHCP options to match
DHCP options identify the vendor and DHCP client functionalities. This information is used by the client to
convey to the DHCP server that the client requires extra information in a DHCP response.
•
– Specify the DHCP option value. Devices matching the specified value are
upgraded.