Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 953)

942 Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
13
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
Syntax:
default-router [|] {|}
Parameters
default-router [|] {|}
Usage Guidelines:
The IP address of the router should be on the same subnet as the client subnet.
Example
rfs4000-229D58(config-dhcp-policy-test-pool-testPool)#default-router
192.168.13.8 192.168.13.9
rfs4000-229D58(config-dhcp-policy-test-pool-testPool)#show context
dhcp-pool testPool
address 192.168.13.4 class dhcpclass1
ddns server 192.168.13.9
ddns domainname WID
ddns multiple-user-class
bootfile test.txt
default-router 192.168.13.8 192.168.13.9
rfs4000-229D58(config-dhcp-policy-test-pool-testPool)#
Related Commands:
dns-server
dhcp-pool-mode commands
Configures a network’s DNS server. The DNS server supports all clients connected to networks
supported by the DHCP server.
[|] Configures the primary default router, using one of the following options:
•
– Specifies the primary default router’s IP address
•
– Specifies a host alias, mapped to the primary default router’s IP address
{|
} Optional. Configures the secondary default router, using one of the following options:
•
– Specifies the secondary default router’s IP address
•
– Specifies a host alias, mapped to the secondary default router’s IP
address. If the primary default router is unavailable, the secondary router is used.
A network host alias maps a name to a single network host. For example, ‘alias host $HOST 1.1.1.100’.
In this example the host alias is ‘$HOST’ and it maps to a single host ‘1.1.1.100’. For more information,
see
alias .
A maximum of 8 default routers can be configured.
no Removes the default router settings