Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 1281)

Brocade Mobility RFS Controller CLI Reference Guide 1273
53-1003098-01
27
no root
rfs7000-37FABE(config-meshpoint-test)#
Related Commands:
description
meshpoint-config-instance
Configures a brief description for this meshpoint. Use this command to describe this meshpoint
and its features.
Supported in the following platforms:
• Access Points — Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point,
Brocade Mobility 1240 Access Point
• Access Points (as root APs only) — Brocade Mobility 650 Access Point
• Wireless Controllers — Brocade Mobility RFS6000, Brocade Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
Syntax:
description
Parameters
description
Example
rfs7000-37FABE(config-meshpoint-test)#description "This is an example of a
meshpoint description"
rfs7000-37FABE(config-meshpoint-test)#show context
meshpoint test
description "This is an example of a meshpoint description"
meshid test
beacon-format mesh-point
control-vlan 1
allowed-vlans 1,10-16,18-23
data-rates 2.4GHz bgn
data-rates 5GHz an
security-mode none
no root
rfs7000-37FABE(config-meshpoint-test)#
Related Commands:
no Resets data rates for each frequency band for this meshpoint
description Configures a description for this meshpoint
The text describing this meshpoint
no Removes the human friendly description provided for this meshpoint