Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 808)

Brocade Mobility RFS Controller CLI Reference Guide 795
53-1003098-01
7
Example
rfs7000-37FABE(config-profile-default-rfs7000)#use advanced-wips-policy
TestWIPSPolicy
rfs7000-37FABE(config-profile-default-rfs7000)#use event-system-policy
TestEventSysPolicy
rfs7000-37FABE(config-profile-default-rfs7000)#show context
profile rfs7000 default-rfs7000
mint link ip 1.2.3.4
mint level 1 area-id 88
.....................................................
interface ge3
ip dhcp trust
qos trust dscp
qos trust 802.1p
interface ge4
ip dhcp trust
qos trust dscp
qos trust 802.1p
interface pppoe1
use event-system-policy TestEventSysPolicy
use firewall-policy default
ntp server 172.16.10.10 prefer version 1
--More--
rfs7000-37FABE(config-profile-default-rfs7000)#
Related Commands:
vrrp
Profile Config Commands
Configures VRRP group settings
A default gateway is a critical resource for connectivity. However, it is prone to a single point of
failure. Thus, redundancy for the default gateway is required. If WAN backhaul is available, and a
router failure occurs, then the controller should act as a router and forward traffic on to its WAN
link.
Define an external VRRP configuration when router redundancy is required in a network requiring
high availability.
Central to VRRP configuration is the election of a VRRP master. A VRRP master (once elected)
performs the following functions:
• Responds to ARP requests
• Forwards packets with a destination link layer MAC address equal to the virtual router’s MAC
address
wips-policy
Associates a WIPS policy
•
– Specify the WIPS policy name.
critical-resource-policy
Associates a critical resource monitoring policy
•
– Specify the critical resource policy name.
no Disassociates a specified policy from this profile