Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 351)

Brocade Mobility RFS Controller CLI Reference Guide 335
53-1003098-01
4
Parameters
None
Example
rfs4000-229D58(config-wlan-test)#downstream-group-addressed-forwarding
rfs4000-229D58(config-wlan-test)#
dynamic-vlan-assignment
wlan-mode commands
Configures dynamic VLAN assignment on this WLAN
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
Syntax:
dynamic-vlan-assignment allowed-vlan
Parameters
dynamic-vlan-assignment allowed-vlan
Example
rfs4000-229D58(config-wlan-test)#dynamic-vlan-assignment allowed-vlans 10-20
rfs4000-229D58(config-wlan-test)#
rfs4000-229D58(config-wlan-test)#show context
wlan test
ssid test
bridging-mode tunnel
encryption-type none
authentication-type none
dynamic-vlan-assignment allowed-vlans 10-20
rfs4000-229D58(config-wlan-test)#
eap-types
wlan-mode commands
Configures client access based on the EAP type used
Supported in the following platforms:
dynamic-vlan-assignment
allowed-vlan Configures a list of VLAN IDs or VLAN alias allowed access to the WLAN
Specify the list of VLAN IDs or the VLAN alias names. For example, 10-20, 25, 30-35, $guest.
For information on VLAN aliases, see
alias .