Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 98)

Brocade Mobility RFS Controller CLI Reference Guide 81
53-1003098-01
3
IMAGE BUILD DATE INSTALL DATE VERSION
-----------------------------------------------------------------------------
---
Primary 01:29:2013 22:34:21 01:16:2013 22:34:00 5.5.0.0-018D
Secondary 01:25:2013 21:56:47 01:13:2013 22:57:12 5.5.0.0-017D
-----------------------------------------------------------------------------
---
Current Boot : Primary
Next Boot : Secondary
Software Fallback : Enabled
rfs4000-229D58#
captive-portal-page-upload
Privileged Exec Mode Commands
Uploads captive portal advanced pages
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
Syntax:
captive-portal-page-upload [|cancel-upload|load-file]
captive-portal-page-upload
[|all|rf-domain]
captive-portal-page-upload [|all]
{upload-time }
captive-portal-page-upload rf-domain
[|all]
{from-controller} {(upload-time )}
captive-portal-page-upload cancel-upload [|all|on rf-domain
[
NAME>|all]]
captive-portal-page-upload load-file
Parameters
captive-portal-page-upload [|all]
{upload-time }
captive-portal-page-upload
Uploads advanced pages specified by the parameter
•
– Specify captive portal name (should be existing and configured).
Uploads to a specified AP
•
– Specify the AP’s MAC address or hostname.