Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 758)

Brocade Mobility RFS Controller CLI Reference Guide 745
53-1003098-01
7
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
Syntax:
ip
[default-gateway|dhcp|dns-server-forward|domain-lookup|domain-name|igmp|name-
server|
nat|route|routing]
ip default-gateway [|failover|priority [dhcp-client <1-1800>|static-route
<1-1800>]
ip [dns-server-forward|domain-lookup|domain-name |name-server
|
routing]
ip dhcp client [hostname|persistent-lease]
ip igmp snooping {forward-unknown-multicast|querier}
ip igmp snooping {forward-unknown-multicast}
ip igmp snooping {querier} {max-response-time <1-25>|query-interval <1-18000>|
robustness-variable <1-7>|timer expiry <60-300>|version <1-3>}
NOTE
The command ‘ip igmp snooping’ can be configured under bridge VLAN context also. For example:
rfs7000-37FABE(config-device 00-15-70-37-FA-BE-bridge-vlan-1)#ip igmp
snooping forward-unknown-multicast
ip nat [crypto|inside|outside|pool]
ip nat [crypto source pool|pool]
ip nat [inside|outside] [destination|source]
ip nat [inside|outside] destination static <1-65535> [tcp|udp]
[( {<1-65535>})]
ip nat [inside|outside] source [list|static]
ip nat [inside|outside] source static <1-65535> [tcp|udp]
[( {<1-65535>})]
ip nat [inside|outside] source list interface
[|
pppoe1|vlan <1-4094>|wwan1] [(address |interface
|overload|
pool )]
ip route
Parameters