Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 40)

22 Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
2
clear crypto ike sa [|all] {on }
clear crypto ipsec sa {on }
clear gre stats {on }
clear event-history
clear ip dhcp bindings [|all] {on }
clear ip ospf process {on }
clear mac-address-table {address |vlan <1-4094>} {on }
crypto Clears encryption module database
ike sa [|all] Clears Internet Key Exchange (IKE) security associations (SAs)
•
– Clears IKE SA entries for the peer identified by the keyword
•
all – Clears IKE SA entries for all peers
on Optional. Clears IKE SA entries, for a specified peer or all peers, on a specified device
•
– Specify the name of the AP, wireless controller, or service platform.
crypto Clears encryption module database
ipsec sa
{on } Clears Internet Protocol Security (IPSec) database SAs
•
on – Optional. Clears IPSec SA entries on a specified device
•
– Specify the name of the AP, wireless controller, or service platform.
gre stats Clears GRE tunnel statistics
on Optional. GRE tunnel statistics on a specified device
•
– Specify the name of the AP, wireless controller, or service platform.
event-history Clears event history cache entries
ip Clears a Dynamic Host Configuration Protocol (DHCP) server’s IP address binding entries
dhcp bindings Clears DHCP connections and server bindings
Clears specific address binding entries. Specify the IP address to clear binding entries.
all Clears all address binding entries
on Optional. Clears a specified address binding or all address bindings on a specified device
•
– Specify the name of the AP, wireless controller, or service platform.
ip ospf process Clears already enabled Open Shortest Path First (OSPF) process and restarts the process
on Optional. Clears OSPF process on a specified device
OSPF is a link-state interior gateway protocol (IGP). OSPF routes IP packets within a single routing domain
(autonomous system), like an enterprise LAN. OSPF gathers link state information from neighboring
routers and constructs a network topology. The topology determines the routing table presented to the
Internet Layer, which makes routing decisions based solely on the destination IP address found in IP
packets.
•
– Specify the name of the AP, wireless controller, or service platform.
mac-address-table Clears the MAC address forwarding table
address Optional. Clears a specified MAC address from the MAC address table.
•
– Specify the MAC address in one of the following formats: AA-BB-CC-DD-EE-FF or
AA:BB:CC;DD:EE:FF or AABB.CCDD.EEFF