Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 41)

Brocade Mobility RFS Controller CLI Reference Guide 23
53-1003098-01
2
clear mac-address-table interface [|ge <1-X>|port-channel <1-X>|
t1e1 <1-4> <1-1>|up <1-2>|vmif <1-X>|xge <1-4>] {on }
clear mint mlcp history {on }
clear role ldap-stats {on }
vlan <1-4094> Optional. Clears all MAC addresses for a specified VLAN
•
<1-4094> – Specify the VLAN ID from 1 - 4094
on Optional. Clears a single MAC entry or all MAC entries, for the specified VLAN on a specified device
•
– Specify the name of the AP, wireless controller, or service platform.
mac-address-table Clears the MAC address forwarding table
interface Clears all MAC addresses for the selected interface. Use the options available to specify the interface.
Clears MAC address forwarding table for the specified layer 2 interface (Ethernet port)
•
– Specify the layer 2 interface name.
ge <1-X> Clears MAC address forwarding table for the specified GigabitEthernet interface
•
<1-X> – Specify the GigabitEthernet interface index from 1 - X.
The number of Ethernet interfaces supported varies for different device types. Brocade Mobility RFS4000
supports 5 GE interfaces.
port-channel <1-X> Clears MAC address forwarding table for the specified port-channel interface
•
<1-X> – Specify the port-channel interface index from 1 - X.
The number of port-channel interfaces supported varies for different device types. Brocade Mobility
RFS4000 supports 3 port-channels.
t1e1 <1-4> <1-1> Clears MAC address forwarding table for the specified T1E1L interface
•
<1-4> – Specify the T1E1 interface index from 1 - 4. A maximum of 4 slots are available. Select the
slot to clear the MAC address forwarding table.
up <1-X> Clears MAC address forwarding table for the WAN Ethernet interface
The number of WAN Ethernet interfaces supported varies for different devices. The Brocade Mobility
RFS4000 and Brocade Mobility RFS6000 devices support 1 WAN Ethernet interface.
vmif <1-X> Clears MAC address forwarding table for the VM interface
•
<1-X> – Specify the VM interface index from 1 - X.
The VMIF interfaces are supported only on the Brocade Mobility RFS9510 series service platforms. The
number of supported VMIFs varies for different device types.
xge <1-4> Clears MAC address forwarding table for the specified TenGigabitEthernet interface
•
<1-4> – Specify the GigabitEthernet interface index from 1 - 4.
This interface is supported only on the NX9000 series service platforms.
on Optional. Clears the MAC address forwarding table, for the selected interface, on a specified device
•
– Specify the name of the AP, wireless controller, or service platform.
mint Clears MiNT related information
mlcp history Clears MiNT Link Creation Protocol (MLCP) client history
on Optional. Clears MLCP client history on a specified device
•
– Specify the name of the AP, wireless controller, or service platform.
role ldap-stats Clears LDAP server statistics
on Optional. Clears LDAP server statistics on a specified device
•
– Specify the name of the AP, wireless controller, or service platform.