Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 63)

Brocade Mobility RFS Controller CLI Reference Guide 45
53-1003098-01
2
device-upgrade load-image [br650|br6511|br1220|
br71xx|br81xx|rfs4000|rfs6000|rfs7000]
load-image [
br6511|br71xx|br81xx|rfs
4000|
rfs6000|rfs7000|] Loads device firmware image from a specified location. Select the device type and provide the location of
the required device firmware image.
•
Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point, Brocade
Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade Mobility 1240 Access Point
•
Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade Mobility
RFS7000
•
Service Platforms — Brocade Mobility RFS9510
•
– Loads
•
firmware image
•
Brocade Mobility 650 Access Point – Loads Brocade Mobility 650 Access Point
firmware image
•
Brocade Mobility 6511 Access Point – Loads Brocade Mobility 6511 Access Point
firmware image
•
Brocade Mobility 1220 Access Point – Loads Brocade Mobility 1220 Access Point
firmware image
•
Brocade Mobility 71XX Access Point – Loads Brocade Mobility 71XX Access Point
firmware image
•
Brocade Mobility 1240 Access Point – Loads Brocade Mobility 1240 Access Point
firmware image
•
Brocade Mobility RFS4000 – Loads Brocade Mobility RFS4000 firmware image
•
Brocade Mobility RFS6000 – Loads Brocade Mobility RFS6000 firmware image
•
Brocade Mobility RFS7000 – Loads Brocade Mobility RFS7000 firmware image
Specify the device’s firmware image location in one of the following formats:
tftp://[:port]/path/file
ftp://:@[:port]/path/file
sftp://:@[:port]>/path/file
http://[:port]/path/file
cf:/path/file
usb:/path/file