Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 563)

550 Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
7
rfs4000-229D58(config)#show context
!
! Configuration of Brocade Mobility RFS4000 version 5.5.0.0-053B
!
!
version 2.3
!
!
alias network-group $TestNetGrpAlias network 192.168.13.0/24 192.168.16.0/24
alias network-group $TestNetGrpAlias address-range 192.168.13.7 to
192.168.13.16 192.168.13.20 to 192.168.13.25
!
alias network $TestNetworkAlias 192.168.13.0/24
!
alias host $TestHostAlias 192.168.13.10
!
alias address-range $TestAddRanAlias 192.168.13.10 to 192.168.13.13
!
alias network-service $NetworkServAlias proto udp
!
alias network-service $kerberos proto tcp 749 750 80 proto udp 68 sourceport
67
!
alias vlan $TestVLANAlias 1
--More--
rfs4000-229D58(config)#
The following examples show the overrides applied to the network-service alias ‘$kerberos’ at the
profile level:
rfs4000-229D58(config-profile-TestBrocade Mobility RFS4000)#alias
network-service $kerberos proto
tcp 88 proto udp 80
rfs4000-229D58(config-profile-TestBrocade Mobility RFS4000)#
The following example shows the overrides applied to the network-service alias
‘$kerberos’ at the profile level:
rfs4000-229D58(config-profile-TestBrocade Mobility RFS4000)#show context
profile rfs4000 TestBrocade Mobility RFS4000
no autoinstall configuration
no autoinstall firmware
...............................................................
interface ge5
ip dhcp trust
qos trust dscp
qos trust 802.1p
interface wwan1
interface pppoe1
use firewall-policy default
service pm sys-restart
router ospf
alias network-service $kerberos proto tcp 88 proto udp 80
rfs4000-229D58(config-profile-TestBrocade Mobility RFS4000)#
Related Commands:
no Removes the use of centralized auto provisioning policy on this profile or device