Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 454)

440 Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
6
show captive-portal client {filter|on|satistics}
show captive-portal client {filter} {captive-portal|ip|state|vlan|wlan}
show captive-portal client {filter} {captive-portal [|
not ]}
show captive-portal client {filter} {ip [|not ]}
show captive-portal client {filter} {state
[pending|success|not[pending|success]]}
show captive-portal client {filter} {vlan [|not ]}
show captive-portal client {filter} {wlan [|not ]}
show captive-portal client {on |statistics} {filter}
{captive-portal|ip|state|vlan|wlan}
Parameters
show captive-portal client {filter} {captive-portal [|
not ]}
show captive-portal client {filter} {ip [|not ]}
show captive-portal client {filter} {state [pending|success|not
[pending|success]]}
captive-portal client Displays captive portal client information
filter Optional. Defines additional filters
captive-portal
[|
not ] Optional. Displays captive portal client information, based on the captive portal name passed
•
– Displays client details for a captive portal specified by the
parameter
•
not – Inverts the match selection
captive-portal client Displays captive portal client information
filter Optional. Defines additional filters
ip [|not ] Optional. Displays captive portal client information, based on the IP address passed
•
– Specify the client’s IP address
•
not – Inverts the match selection
captive-portal client Displays captive portal client information
filter Optional. Defines additional filters
state Optional. Filters clients based on their state of authentication
pending Displays clients redirected for authentication
success Displays successfully authenticated clients
not [pending|success]] Inverts match selection
•
pending – Displays successfully authenticated clients (opposite of pending authentication)
•
success – Displays clients redirected for authentication (opposite of successful
authentication)