Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 1228)

1220 Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
23
remote-cookie size [4|8] <1-4294967295> {<1-4294967295>}
Example
rfs7000-37FABE(config-profile
default-rfs7000-l2tpv3-manual-session-test)#remote-cookie size 8 400 700
rfs7000-37FABE(config-profile
default-rfs7000-l2tpv3-manual-session-test)#show context
l2tpv3 manual-session test
local-ip-address 1.2.3.4
peer ip-address 5.6.7.8 udp port 150
mtu 200
local-session-id 1
remote-cookie size 8 400 700
rfs7000-37FABE(config-profile default-rfs7000-l2tpv3-manual-session-test)#
Related Commands:
remote-session-id
l2tpv3-manual-session-commands
Configures the manual session’s remote ID. This ID is passed in the establishment of the tunnel
session.
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
Syntax:
remote-session-id <1-4294967295>
Parameters
remote-session-id <1-4294967295>
remote-cookie size [4|8] Configures the remote cookie field size for this manual session. The options are:
•
4 – 4 byte remote cookie field
•
8 – 8 byte remote cookie field
<1-4294967295> Configures the remote cookie value first word. Applies to both the 4 byte and 8 byte local cookies
<1-4294967295> Optional – Configures the remote cookie value second word. Applicable to only 8 byte cookies. This
parameter is ignored for 4 byte cookies.
no Removes the manual session’s remote cookie field size
remote-session-id
<1-4294967295> Configures this manual session’s remote ID. Specify a value from 1 - 4294967295.