Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 1325)

Brocade Mobility RFS Controller CLI Reference Guide 1317
53-1003098-01
28
Example
The following examples show four EAP authentication methods associated with
the NAI realm ‘mail.example.com’. Each method supports a different EAP
authentication mechanism:
rfs4000-229D58(config-passpoint-policy-test-nai-realm-mail.example.com)#eap-m
ethod 1 ttls auth-param vendor hex 00001E
rfs4000-229D58(config-passpoint-policy-test-nai-realm-mail.example.com)#
rfs4000-229D58(config-passpoint-policy-test-nai-realm-mail.example.com)#eap-m
ethod 2 rsa-public-key auth-param credential cert
rfs4000-229D58(config-passpoint-policy-test-nai-realm-mail.example.com)#
rfs4000-229D58(config-passpoint-policy-test-nai-realm-mail.example.com)#eap-m
ethod 3 otp auth-param credential username-password
rfs4000-229D58(config-passpoint-policy-test-nai-realm-mail.example.com)#
rfs4000-229D58(config-passpoint-policy-test-nai-realm-mail.example.com)#eap-m
ethod 4 peap auth-param credential cert
rfs4000-229D58(config-passpoint-policy-test-nai-realm-mail.example.com)#
rfs4000-229D58(config-passpoint-policy-test-nai-realm-mail.example.com)#show
context
nai-realm mail.example.com
eap-method 1 ttls auth-param vendor hex 00121F
eap-method 2 rsa-public-key auth-param credential cert
eap-method 3 otp auth-param credential username-password
eap-method 4 peap auth-param credential cert
rfs4000-229D58(config-passpoint-policy-test-nai-realm-mail.example.com)#
net-auth-type
passpoint-policy
Configures the network authentication type used in this hotspot. The details configured are
returned in response to an ANQP query.
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
Syntax:
net-auth-type [accept-terms|dns-redirect|http-redirect|online-enroll] {url
}
Parameters
net-authtype [accept-terms|dns-redirect|http-redirect|online-enroll] {url
}
net-auth-type Specifies the network authentication type used with this passpoint policy. The options are: accept-terms,
dns-redirect, http-redirect, and online-enroll
accept-terms Enables user acceptance of terms and conditions