Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 283)

Brocade Mobility RFS Controller CLI Reference Guide 267
53-1003098-01
4
no customize
[hostname-column-width|show-wireless-client|show-wireless-client-stats|
show-wireless-client-stats-rf|show-wireless-meshpoint|show-wireless-meshpoint
-neighbor-stats|show-wireless-meshpoint-neighbor-stats-rf|show-wireless-radio
|show-wireless-radio-stats|show-wireless-radio-stats-rf]
no passowrd-encryption secret 2
no profile {br650|br6511|br1220|br71xx|br81xx|
|containing|filter}
no wlan [|all|containing ]
no service set [command-history|reboot-history|upgrade-history] {on
}
Example
rfs7000-37FABE(config)#no ?
aaa-policy Delete a aaa policy
aaa-tacacs-policy Delete a aaa tacacs policy
containing Optional. Removes devices with hostname containing the substring specified by the keyword
filter type
Optional. Filters devices based on the device type selected
•
type – Select the access point or wireless controller type.
no customize Restores the output of the show wireless client parameters to default
no password-encryption Disables password encryption
no profile Removes a profile and its associated configurations
br650 Optional. Removes a Brocade Mobility 650 Access Point profile
br6511 Optional. Removes a Brocade Mobility 6511 Access Point profile
br1220 Optional. Removes a Brocade Mobility 1220 Access Point profile
br71xx Optional. Removes a Brocade Mobility 71XX Access Point profile
rfs4000 Optional. Removes a Brocade Mobility RFS4000 profile
rfs6000 Optional. Removes a Brocade Mobility RFS6000 profile
rfs7000 Optional. Removes a Brocade Mobility RFS7000 profile
Specifies the profile name
no wlan Removes a WLAN
Identifies the WLAN name
all Removes all WLANs
containing
Removes WLANs whose names contain the string specified by the parameter
no service set Resets service command parameters
command-history Resets command history file size to default (200)
reboot-history Resets reboot history file size to default (50)
upgrade-history Resets upgrade history file size to default (50)
on Optional. Resets service command parameters on a specified device
•
– Specify name of the AP, wireless controller, or service platform.