Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 827)

814 Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
7
interface vlan1
ip address 192.168.13.9/24
ip address 192.168.0.1/24 secondary
ip dhcp client request options all
use client-identity-group ClientIdentityGroup
logging on
logging console warnings
logging buffered warnings
rfs4000-229D58(config-device-00-23-68-22-9D-58)#
Related Commands:
hostname
Device Config Commands
Sets the system's network name
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
Syntax:
hostname
Parameters
hostname
Example
rfs7000-37FABE(config-device-00-04-96-4A-A7-08)#hostname TechPubAP7131
The hostname has changed from ‘br7131-4AA708’ to ‘TechPubAP7131’
rfs7000-37FABE(config-device-00-04-96-4A-A7-08)#show context
br71xx 00-04-96-4A-A7-08
use profile default-br71xx
use rf-domain default
hostname TechPubAP7131
area RMZEcospace
floor 5thfloor
contact motorolasolutions
country-code us
channel-list 2.4GHz 1,2
rfs7000-37FABE(config-device-00-04-96-4A-A7-08)#
no Removes device’s geographic coordinates
hostname Sets the name of the managing wireless controller, service platform, or access point. This name is
displayed when accessed from any network.