Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 719)

706 Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
7
Syntax:
ldpc
Parameters
None
Example
rfs4000-229D58(config-profile-Test81XX-if-radio1)#ldpc
rfs4000-229D58(config-profile-Test81XX-if-radio1)#
rfs4000-229D58(config-profile-Test81XX-if-radio1)#show context
interface radio1
ldpc
rfs4000-229D58(config-profile-Test81XX-if-radio1)#
Related Commands:
lock-rf-mode
interface-config-radio-instance
Retains user configured RF mode settings for the selected radio
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
Syntax:
lock-rf-mode
Parameters
None
Example
rfs7000-37FABE(config-profile-71xxTestProfile-if-radio1)#lock-rf-mode
rfs7000-37FABE(config-profile-71xxTestProfile-if-radio1)#show context
interface radio1
description Primary\ radio\ to\ use
channel 1
data-rates b-only
beacon period 50
beacon dtim-period bss 1 5
beacon dtim-period bss 2 2
beacon dtim-period bss 3 5
beacon dtim-period bss 4 5
beacon dtim-period bss 5 5
beacon dtim-period bss 6 5
beacon dtim-period bss 7 5
beacon dtim-period bss 8 5
beacon dtim-period bss 9 5
beacon dtim-period bss 10 5
no Disables LDPC support