Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 418)

Brocade Mobility RFS Controller CLI Reference Guide 403
53-1003098-01
5
service load-balancing clear-client-capability [|all] {on }
service locator {<1-60>} {(on )}
service radio <1-3> dfs simulate-radar [extension|primary]
service radius test [|] {wlan
ssid } {(on )}
load-balancing Enables wireless load balancing by clearing client capability records
clear-client-capability
[|all] Clears a specified client or all client’s capability records
•
– Clears capability records of a specified client. Specify the client’s MAC address in the
AA-BB-CC-DD-EE-FF format.
•
all – Clears the capability records of all clients
on Optional. Clears client capability records on a specified device
•
– Specify the name of the AP, wireless controller, or service platform.
locator Enables LEDs
<1-60> Sets LED flashing time from 1 - 60 seconds.
on The following keyword is recursive and common to the <1-60> parameter:
•
on – Optional. Enables LEDs on a specified device
•
– Specify name of the AP, wireless controller, or service platform.
radio <1-3> Configures radio’s parameters
•
<1-3> – Specify the radio index from 1 - 3.
dfs Enables Dynamic Frequency Selection (DFS)
simulate-radar
[extension|primary] Simulates the presence of a radar on a channel. Select the channel type from the following options:
•
extension – Simulates a radar on the radio’s current extension channel
•
primary – Simulates a radar on the radio’s current primary channel
radius test Tests RADIUS server’s account. This command sends an access-request packet to the RADIUS server. Use
this command to confirm time and data/bandwidth parameters for valid wireless clients.
•
test – Tests the RADIUS server’s account with user provided parameters
[|] Sets the RADIUS server’s IP address or hostname
•
– Specifies the RADIUS server’s IP address
•
– Specifies the RADIUS server’s hostname
Specify the RADIUS server’s shared secret.
Specify username for authentication.
Specify the password.
wlan
ssid Optional. Tests the RADIUS server on the local WLAN. Specify the local WLAN name.
•
ssid – Specify the local RADIUS server’s SSID.
on Optional. This is a recursive parameter also applicable to the WLAN parameter. Performs tests on a specified
device
•
– Specify the name of the AP, wireless controller, or service platform.