Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) User Manual
Page 553
540
Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
7
Although profiles assign a common set of configuration parameters across devices, individual
devices can still be assigned unique configuration parameters that follow the flat configuration
model. As individual device updates are made, these devices no longer share the profile based
configuration they originally supported. Therefore, changes made to a profile are not automatically
inherited by devices who have had their configuration customized. These devices require careful
administration, as they cannot be tracked as profile members. Their customized configurations
overwrite their profile configurations until the profile is re-applied.
NOTE
The commands present under ‘Profiles’ are also available under the ‘Device mode’. The additional
commands specific to the ‘Device mode’ are listed separately.
This chapter is organized into the following topics:
•
•
To view the list of device profiles supported, use the following command:
br650 Brocade Mobility 650 Access Point access point profile
br6511 Brocade Mobility 6511 Access Point access point profile
br1220 Brocade Mobility 1220 Access Point access point profile
br71xx Brocade Mobility 71XX Access Point access point profile
br81xx Brocade Mobility 1240 Access Point access point profile
containing Specify profiles that contain a sub-string in the profile name
filter Specify addition selection filter
rfs4000 Brocade Mobility RFS4000 wireless controller profile
rfs6000 Brocade Mobility RFS6000 wireless controller profile
rfs7000 Brocade Mobility RFS7000 wireless controller profile
rfs7000-37FABE(config)#profile rfs7000 default-rfs7000
rfs7000-37FABE(config-profile-default-rfs7000)#
rfs7000-37FABE(config)#profile br71xx default-br71xx
rfs7000-37FABE(config-profile-default-br71xx)#
Profile Mode commands:
adopter-auto-provisioning-policy-lookup Use centralized auto-provisioning
policy when adopted by another
controller
alias Alias
area Set name of area where the system
is located
arp Address Resolution Protocol (ARP)
auto-learn-staging-config Enable learning network
configuration of the devices that
come for adoption
autogen-uniqueid Autogenerate a unique id
autoinstall Autoinstall settings
bridge Ethernet bridge
captive-portal Captive portal
cdp Cisco Discovery Protocol
cluster Cluster configuration
configuration-persistence Enable persistence of configuration
across reloads (startup config