Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 1028)

Brocade Mobility RFS Controller CLI Reference Guide 1019
53-1003098-01
16
Configures the message of the day (motd) text. This text is displayed at login to clients connecting
through Telnet or SSH.
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
Syntax:
banner motd
Parameters
banner motd
Example
rfs7000-37FABE(config-management-policy-test)#banner motd “Have a Good Day”
rfs7000-37FABE(config-management-policy-test)#show context
management-policy test
http server
no ssh
aaa-login radius external
aaa-login radius policy test
banner motd “Have a Good Day”
rfs7000-37FABE(config-management-policy-test)#
Related Commands:
ftp
management-policy
Enables File Transfer Protocol (FTP) on this management policy. FTP is the standard protocol for
transferring files over a TCP/IP network. FTP requires administrators enter a valid username and
password authenticated locally. FTP access is disabled by default.
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
motd Sets the motd banner
•
– Enter the message string. The message string should not exceed 255 characters.
no Removes the motd banner