Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 986)

Brocade Mobility RFS Controller CLI Reference Guide 975
53-1003098-01
13
dhcp-pool pool1
address 1.2.3.4 class dhcpclass1
update dns override
--More--
rfs7000-37FABE(config-dhcp-policy-test)#
rfs7000-37FABE(config-dhcp-policy-test)#no bootp ignore
rfs7000-37FABE(config-dhcp-policy-test)#no dhcp-class dhcpclass1
rfs7000-37FABE(config-dhcp-policy-test)#no dhcp-pool pool1
The following example shows the DHCP policy ‘test’ settings after the ‘no’
commands are executed:
rfs7000-37FABE(config-dhcp-policy-test)#show context
dhcp-server-policy test
rfs7000-37FABE(config-dhcp-policy-test)#
Related Commands:
option
dhcp-server-policy
Configures raw DHCP options. The DHCP option has to be configured in the DHCP server policy. The
options configured in the DHCP pool/DHCP server policy can also be used in static bindings.
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
Syntax:
option <0-250> [ascii|hexstring|ip]
Parameters
option <0-250> [ascii|hexstring|ip]
bootp Configures the BOOTP protocol parameters
dhcp-class Configures the DHCP user class parameters
dhcp-pool Configures the DHCP pool
option Configures the DHCP options
ping Configures the DHCP ping timeout
Configures the option name
<0-250> Configures the DHCP option code from 0 - 250
ascii Configures the DHCP option as an ASCII string