Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) User Manual
Page 962
Brocade Mobility RFS Controller CLI Reference Guide
951
53-1003098-01
13
dns-server 192.168.13.19
netbios-name-server 192.168.13.25
next-server 192.168.13.26
rfs4000-229D58(config-dhcp-policy-test-pool-testPool)#
Related Commands:
no
Removes or resets this DHCP user pool’s settings
Supported in the following platforms:
•
Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
•
Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
•
Service Platforms — Brocade Mobility RFS9510
Syntax:
no
[address|bootfile|ddns|default-router|dns-server|domain-name|excluded-address
|
lease|netbios-name-server|netbios-node-type|network|next-server|option|
respond-via-unicast|static-binding|static-route|update]
no [bootfile|default-router|dns-server|domain-name|lease|netbios-name-server|
netbios-node-type|next-server|network|respond-via-unicast]
no address [
no address range [
[
no ddns [domainname|multiple-user-class|server|ttl]
no excluded-address [
no excluded-address range [
no option
no static-binding client-identifier
no static-binding hardware-address
no static-route
no update dns {override}
Parameters
Removes the next server configuration settings