Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 537)

Brocade Mobility RFS Controller CLI Reference Guide 523
53-1003098-01
6
show wireless meshpoint {tree} {on }
show wireless meshpoint {usage-mappings|on }
show wireless mobility-database {on }
show wireless radio {detail} { {<1-3>|filter|on}}
[|
detail|statistics {rf}] Select one of the following parameter to view neighbor related information
•
– Displays detailed multicast information for a specified meshpoint. Specify
the meshpoint name.
•
detail – Displays detailed multicast information for all meshpoints
•
statistics – Displays neighbors related statistics
•
rf – Optional. Displays RF related statistics for neighbors
on NAME> The following keyword is common to all of the above parameters:
•
on – Optional. Displays meshpoint neighbor information, based on the
parameters passed, on a specified device or RF Domain.
wireless Displays wireless configuration parameters
meshpoint Displays meshpoint related information
NOTE: The show > wireless > meshpoint > tree command can be executed only from a wireless controller.
tree Optional. Displays meshpoint network tree
on NAME> Optional. Displays meshpoint network tree on a specified device or RF Domain
•
– Optional. Specify the name of AP, wireless controller, service
platform, or RF Domain
wireless Displays wireless configuration parameters
meshpoint Displays meshpoint related information
usgae-mappings Optional. Lists all devices and profiles using the meshpoint
on NAME> Optional. Displays meshpoint applied to a specified device or RF Domain
•
– Optional. Specify the name of AP, wireless controller,service platform,
or RF Domain
wireless Displays wireless configuration parameters
mobility-database Displays controller-assisted mobility database
on
> The following keyword is recursive and common to the ‘filter ’ parameter:
•
on – Optional. Displays detailed radio operation status for all or a
specified radio on a specified device or RF Domain.
wireless Displays wireless configuration parameters
radio Displays radio operation status and other related information
detail Optional. Displays detailed radio operation status
Optional. Displays detailed information for a specified radio. Specify the MAC address or hostname, or
append the interface number to form the radio ID in the AA-BB-CC-DD-EE-FF:RX or HOSTNAME:RX format.
<1-3> Optional. Specify the radio interface index from 1 - 3 (if not specified as part of the radio ID)