Connect – Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) User Manual
Page 46
28
Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
2
Related Commands:
connect
Begins a console connection to a remote device using the remote device’s MiNT ID or name
Supported in the following platforms:
•
Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
•
Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
•
Service Platforms — Brocade Mobility RFS9510
Syntax:
connect [mint-id
Parameters
connect [mint-id
Example
rfs7000-37FABE>show mint lsp-db
2 LSPs in LSP-db of 70.37.FA.BE:
LSP 68.11.E6.C4 at level 1, hostname "ap7131-11E6C4", 1 adjacencies, seqnum
LSP 70.37.FA.BE at level 1, hostname "rfs7000-37FABE", 1 adjacencies, seqnu20
rfs7000-37FABE>connect mint-id 68.11.E6.C4 ?
Entering character mode
Escape character is '^
rfs7000-37FABE>connect mint-id 68.11.E6.C4 ?
Entering character mode
Escape character is '^
]'.
Brocade Mobility 7131 Access Point release 5.5.0.0-018D
br7131-11E6C4 login: Connection closed by foreign host
rfs7000-37FABE>
rfs4000-229D58>show mint lsp-db
1 LSPs in LSP-db of 68.22.9D.58:
LSP 68.22.9D.58 at level 1, hostname "rfs4000-229D58", 0 adjacencies, seqnum
606
Creates a new cluster on the specified device
Adds a wireless controller or service platform, as a member, to an existing cluster of controllers
mint-id
Connects to the remote system using its MiNT ID
•
Connects to the remote system using its name
•