Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 70)

52 Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
2
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
Syntax:
l2tpv3 tunnel [|all]
l2tpv3 tunnel [down|session|up]
l2tpv3 tunnel [down|up] {on }
l2tpv3 tunnel session [down|up] {on
}
l2tpv3 tunnel all [down|up] {on }
Parameters
l2tpv3 tunnel [down|up] {on }
l2tpv3 tunnel session [down|up] {on
}
l2tpv3 tunnel all [down|up] {on }
Example
rfs7000-37FABE>l2tpv3 tunnel Tunnel1 session Tunnel1Session1 up on
rfs7000-37FABE
l2tpv3 tunnel Establishes or brings down L2TPv3 tunnels
[down|up] Specifies the tunnel name to establish or bring down
•
down – Brings down the specified tunnel
•
up – Establishes the specified tunnel
on Optional. Establishes or brings down a tunnel on a specified device
•
– Specify the name of the AP, wireless controller, or service platform.
l2tpv3 tunnel Establishes or brings down L2TPv3 tunnels
[session
]
[down|up] Establishes or brings down a specified session inside an L2TPv3 tunnel
•
– Specify the tunnel name.
•
session – Specify the session name.
•
down – Brings down the specified session
•
up – Establishes the specified session
on Optional. Establishes or brings down a tunnel session on a specified device
•
– Specify the name of the AP, wireless controller, or service platform.
l2tpv3 tunnel Establishes or brings down L2TPv3 tunnels
all [down|up] Establishes or brings down all L2TPv3 tunnels
•
down – Brings down all tunnels
•
up – Establishes all tunnels
on Optional. Establishes or brings down all tunnels on a specified device
•
– Specify the name of the AP, wireless controller, or service platform.