Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 1226)

1218 Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
23
peer ip-address 5.6.7.8 udp port 150
traffic-source vlan 50-60 native-vlan 2
local-session-id 1
remote-session-id 200
remote-cookie size 8 400 700
rfs7000-37FABE(config-profile default-rfs7000-l2tpv3-manual-session-test)#
rfs7000-37FABE(config-profile default-rfs7000-l2tpv3-manual-session-test)#no
local-ip-address
rfs7000-37FABE(config-profile default-rfs7000-l2tpv3-manual-session-test)#no
local-session-id
rfs7000-37FABE(config-profile default-rfs7000-l2tpv3-manual-session-test)#no
remote-session-id
The following example shows the manual session ‘test’ settings after the ‘no’
commands are executed:
rfs7000-37FABE(config-profile
default-rfs7000-l2tpv3-manual-session-test)#show context
l2tpv3 manual-session test
peer ip-address 5.6.7.8 udp port 150
traffic-source vlan 50-60 native-vlan 2
remote-cookie size 8 400 700
rfs7000-37FABE(config-profile default-rfs7000-l2tpv3-manual-session-test)#
Related Commands:
peer
l2tpv3-manual-session-commands
Configures peer(s) allowed to establish the manual session tunnel. The peers are identified by their
IP addresses.
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
Syntax:
local-cookie Configures the local cookie field size for the manual session
local-ip-address Configures the manual session’s local source IP address
local-session-id Removes the manual session’s local session ID
mtu Configures the manual session’s MTU size
peer Configures the manual session’s peers
remote-cookie Configures the manual session’s remote cookie field size
remote-session-id Configures the manual session’s remote session ID
traffic-source Configures the traffic source tunneled in this session