Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 467)

Brocade Mobility RFS Controller CLI Reference Guide 453
53-1003098-01
6
CA Certificate details:
Serial Number: 01
Subject Name:
CN=70.37.fa.be:2010-04-26-15-00-39, C=US, O=Brocade
Issuer Name:
CN=70.37.fa.be:2010-04-26-15-00-39, C=US, O=Brocade
Valid From : Mon Apr 26 15:00:39 2010 UTC
Valid Until: Tue Apr 26 15:00:39 2011 UTC
--More--
rfs7000-37FABE(config)#
device-upgrade
show commands
Displays device firmware upgradation information for devices adopted by a wireless controller or
access point
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
Syntax:
show device-upgrade [history|load-image-status|status|versions]
Parameters
show device-upgrade [history|load-image-status|status|versions]
Example
rfs4000-229D58#show device-upgrade versions
-----------------------------------------------------------------------------
---
CONTROLLER DEVICE-TYPE VERSION
-----------------------------------------------------------------------------
---
00-23-68-22-9D-58 rfs4000 none
00-23-68-22-9D-58 br1220 5.5.0.0-018D
00-23-68-22-9D-58 rfs6000 none
device-upgrade Displays device upgrade information based on the parameters passed
history Displays device upgrade history
load-image-status Displays firmware image loading status. The output displays the image loading status in
percentage.
For example:
#show device-upgrade load-image-status
Download of br81xx firmware file is 47 percent complete
status Displays device firmware upgrade status
versions Displays firmware image versions