Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 159)

142 Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
3
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
Syntax:
upgrade [|] {background|on }
Parameters
upgrade [|] {background|on }
Example
rfs7000-37FABE#upgrade tftp://157.235.208.105:/img
var2 is 10 percent full
/tmp is 2 percent full
Free Memory 161896 kB
FWU invoked via Linux shell
Running from partition /dev/hda5, partition to
rfs7000-37FABE#upgrade tftp://157.125.208.235/img
Running from partition /dev/mtdblock7, partition to update is /dev/mtdblock6
Related Commands:
upgrade-abort
Privileged Exec Mode Commands
Aborts an ongoing software image upgrade
Supported in the following platforms:
Specify the target firmware image location in the following format:
cf:/path/file
usb1:/path/file
usb2:/path/file
Specify the target firmware image location in the following format:
tftp://[:port]/path/file
ftp://:@[:port]/path/file
sftp://:@[:port]>/path/file
http://[:port]/path/file
cf:/path/file
usb:/path/file
background Optional. Performs upgrade in the background
on Optional. Upgrades the software image on a remote device
•
– Specify the name of the AP, wireless controller, or service platform.
no Removes a patch installed on a specified device