Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 1061)

1052 Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
17
Example
rfs7000-37FABE(config-radius-server-policy-test)#chase-referral
Related Commands:
crl-check
radius-server-policy
Enables a certificate revocation list (CRL) check on this RADIUS server policy
A CRL is a list of revoked certificates issued and subsequently revoked by a Certification Authority
(CA). Certificates can be revoked for a number of reasons including failure or compromise of a
device using a certificate, a compromise of a certificate key pair or errors within an issued
certificate. The mechanism used for certificate revocation depends on the CA.
This option is disabled by default.
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
Syntax:
crl-check
Parameters
None
Example
rfs7000-37FABE(config-radius-server-policy-test)#crl-check
rfs7000-37FABE(config-radius-server-policy-test)#show context
radius-server-policy test
authentication eap-auth-type tls
crl-check
rfs7000-37FABE(config-radius-server-policy-test)#
Related Commands:
ldap-agent
radius-server-policy
Configures the LDAP agent’s settings in the RADIUS server policy context
no Disables LDAP server referral chasing
no Disables CRL check on a RADIUS server policy