Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 559)

546 Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
7
Related Commands:
alias
Profile Config Commands
Configures network, VLAN, and service aliases. The aliases defined on this profile applies to all
devices using this profile.
Aliases can be also defined at the device level.
NOTE
You can apply overrides to aliases at the device level. For more information on aliases, see alias .
Overrides applied at the device level take precedence.
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
Syntax:
alias [address-range|host|network|network-group|network-service|string|vlan]
alias address-range to
alias host
alias network
alias network-group [address-range|host|network]
alias network-group [address-range to
{ to }|host
{}|
network {}]
alias network-service proto
[<0-254>||eigrp|gre|
igmp|igp|ospf|vrrp]
{(<1-65535>||bgp|dns|ftp|ftp-data|gopher|https|ldap|nntp|
ntp|pop3|proto|sip|smtp|sourceport|ssh|telnet|tftp|www)}
alias network-service proto
[<0-254>||eigrp|gre|
igmp|igp|ospf|vrrp]
{(<1-65535>||bgp|dns|ftp|ftp-data|gopher|https|ldap|nntp|
ntp|pop3|proto|sip|smtp|sourceport
[<1-65535>|]|ssh|telnet|tftp|www)}
alias string
no Removes the use of centralized auto provisioning policy on this profile or device